A forward-facing probe can show the path into a cavity while leaving the wall beside it difficult to examine. This dual-lens USB camera adds a side view to the front view, giving inspection devices a practical way to observe both areas through one access point.
Its front camera is set for a 5cm focus distance and the side camera for 4cm. This configuration suits tasks with defined front and lateral targets; check both distances against the cavity geometry before selecting the probe.
1. A dedicated view of the wall: The side camera observes surfaces beside the probe, complementing the forward view.
2. Separate focus distances: The 5cm front and 4cm side specifications help assess fit against the actual inspection geometry.
3. Lighting at both cameras: Six front LEDs and one side LED supply illumination in the two viewing directions.
4. USB connection for a dedicated host: USB2.0 supports integration with an inspection terminal after host and camera-control compatibility are verified.
|
1. Pipe inspection terminals: Observe the forward passage and adjacent pipe surfaces.
2. Machinery cavity viewers: Check components ahead of the probe and walls beside it.
3. Enclosed assembly checking tools: Inspect lateral joints or mounting areas through a limited opening.
4. Maintenance inspection displays: Provide two viewing directions in a dedicated USB-based inspection device.
1. Define the forward target and the side surface that must be visible.
2. Check probe clearance and lens-to-target distance in both directions.
3. Review the USB host and camera-selection controls.
4. Test the sample for front and side visibility, illumination and mechanical fit.
5. Confirm the configuration for repeat production.
Our products are sold all over the world, you can rest assured.
